OMNIE not only provide UFH systems for every type of building. Circoflo underfloor heating systems ensure fast, flexible installation with pipes that can be laid in any direction. The small, lightweight panels are easy to handle on-site. Using standardized 13.2mm pipes, these systems deliver high heat output and rapid warm-up for ultimate comfort and efficiency.
OMNIE not only provide UFH systems for every type of building. We also cater for every scale of the project. We have applied our years of expertise to create a range of products for smaller-budget builds and projects that may only require a handful of rooms or areas to be heated. Here a full system design is often not needed, with the build requiring just a straightforward and a robust underfloor heating system that will do an effective job. This is where the OMNIE Circoflo system comes in. We have four low-cost systems with good heating performance, suitable for all floor constructions and almost any floor covering.
The 22mm T&G-edged chipboard panels ensure the 13.2mm pipe is close to the floor finish as possible. Factory fitted aluminium diffuser strips further improve performance and provide a method for detecting the pipe. The panels are universal meaning no separate loops and straights need to be laid. The panels require a 6mm flooring grade Ply screwed and glued to complete the structural deck. • Panel thickness: 22mm (+6mm Ply) • Suitable for: Suspended timber or batten floors • Pipe centres: 150mm using 13.2mm pipe • Dimensions: 2400mm x 600mm
The extruded polystyrene panel (XPS) is only 18mm in height and pre-routed at 133mm centres for use with CircoFlo 13.2mm pipe. Panels feature an adhesive layer on the underside for ease of installation, simply peel and place onto the subfloor, lay pipe and screed over. Panels are universal and multi-directional meaning no separate loops and straights need to be laid. Panel thickness: 15mm Suitable for: Low build-up applications Pipe centres: 133mm using 13.2mm pipe Dimensions: 800mm x 400mm
OMNIE TileDeck panel design combines a 20mm extruded polystyrene (XPS) insulation panel with a 1.5mm scrim reinforced cementitious layer to top and bottom, making for easier installation and excellent heat output. The lightweight panels are easy to cut and the 13.2mm pipe fix easily in the pre-routed channels. The panels are universal meaning no separate loops and straights need to be laid. TileDeck provides an extremely strong support for the tiled floor covering, preventing sagging over time and protect the system from being damaged during installation. Panel thickness: 20mm Suitable for: Solid and timber floors Pipe centres: 133mm Dimensions: 600mm x 400mm
The ClipRail mounting units interlock and feature a barbed end to fix into the insulation. The flexible pipe is held at 133mm centres. An additional vapour control layer / membrane may be required over the insulation prior to fixing the ClipRail units. Panel thickness: N/A Suitable for: Screed Floors Pipe centres: Flexible normally 150mm Dimensions: N/A